1. Clean the area the vinyl will be placed on, and wipe away any debris.
2. Flip the vinyl facing down, with the white backing up. Slowly left from the corner pulling at an angle versus straight up. If the letters are not sticking to the transfer (clear) tape- slowly manipulate the backing to help the letters stick to the layer.
3. Once the paper backing is pulled off completely- place it carefully in the area you would like. Using a straight edge, like a credit card- press firmly down from the center out on both sides letting the edger act as a squeegee over the lettering.
4. Carefully and slowly peel off the sticky top layer to reveal the vinyl.